Arris SBG6782 AC User Guide Uživatelský manuál stáhnout pdf (Strana 44)

Gateway Configuration Screen Definitions

SBG6782-AC Wireless Cable Modem & Router • User Guide

365-095-23865 x.1

DHCP

You can use the Basic DHCP (Dynamic Host Configuration Protocol) screen to configure the IP

settings of your SBG6782-AC gateway and the DHCP server on your home network. You can

also view the status of the optional internal SBG6782-AC DHCP server.

Do not modify these setting unless you are an experienced network administrator with a strong

understanding of IP addressing, sub-netting, and DHCP.

Figure 24 – Basic DHCP Screen

Table 8 – Basic DHCP Screen-Field Descriptions

FIELD

DESCRIPTION

Enable DHCP Server

Checkmark Enabled to enable the SBG6782-AC DHCP Server.

Uncheck Enabled to disable the SBG6782-AC DHCP Server.

Starting Local Address

Enter the starting IP address to be assigned by the SBG6782-

AC DHCP server to clients in dotted-decimal format.

Default is 192.168.0.2.

Max Number of Network

Devices

Sets the maximum number of clients for the SBG6782-AC

DHCP server to assign a private IP address.

Lease Time

Sets the time in seconds that the SBG6782-AC DHCP server

leases an IP address to a client. The default is 3600 seconds (60

minutes).

Reserve IP Address

Lists the MAC address, IP address, and Host name of the

DHCP client device.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 54 55

Žádné komentáře

Arris SBG6782 AC User Guide Uživatelský manuál Strana 44